Tap Replacement in Windsor
A whole new tap is a small job with a long rulebook attached. Tap replacement in Windsor is what we do once repairs stop being worth it: the old fitting comes off, the new one goes on, and the water gets tested before we leave. Our licensed plumbers handle it as part of the tap and toilet service we run across Windsor, for houses, flats and small businesses.
If we're late, $100 comes off your bill
- Licensed and InsuredEvery job done by a licensed plumber. QBCC No: 15024607
- Fixed Quote FirstFlat-rate pricing, agreed before any work starts
- Lifetime Labour WarrantyBacked by our Fix-It-or-It's-Free guarantee (T&Cs apply)
- $0 Call-Out FeesNo extra charge for nights, weekends or public holidays
The suburb runs from pre-war Queenslanders on the hills to unit blocks near the Enoggera Creek Bikeway, and both kinds of home call us for new tapware. Every job is done by a licensed plumber, with $0 call-out fees.
A tap that only needs a washer or cartridge is a repair, not a replacement; the tap repairs page handles that side.
Matching a New Tap to Your Sink or Basin
A mixer blends hot and cold at a single spout under one lever or a pair of handles; two separate taps keep the hot and cold apart, each with its own spout. Whichever style you pick, the new fitting has to suit what is already there. Three things decide that:
- how many holes sit in the benchtop or basin, and how wide they are
- whether the tap sits on the deck or comes off the wall
- the supply connections underneath
A wall-mounted tap draws from pipes inside the wall, so changing between wall and deck styles means opening up the wall or altering the basin, not just swapping the fitting. We measure up the old setup before you buy anything, so the new one fits first time. Where isolation valves sit on the supply lines, we shut the water to that one tap alone.
If the whole bathroom is being refreshed at once, our toilet installation page covers that side of the job.
Tap Washers, Whole Taps and the Licence Line
Only a licensed plumber may legally swap a whole tap in Queensland; the QBCC's home owner guide lists the job as one an unlicensed owner cannot do. The QBCC's unregulated list covers just one tap task: changing the internal washer, or the jumper valve under it. Even that work has to meet the standards.
The paperwork splits two ways:
A like-for-like changeover
is minor work: a QBCC licensee does it, no permit, no Form 4.
A new or moved tap
is notifiable work: council issues no permit, but a Form 4 goes to the QBCC within 10 business days of finishing.
Rentals add their own rules. A tenant wanting to fit a fixture needs the owner's written go-ahead on a Form 23, and a reasonable request can't be refused without good reason. If the tenant goes ahead anyway, the owner or manager has three options: treat the change as a breach and raise a dispute, accept it as an improvement, or remove the fitting and pass the removal cost to the tenant.
WaterMark and WELS on a New Tap
WaterMark certification is the mark that shows a plumbing product has passed testing against Australia's Plumbing Code. The Water Efficiency Labelling and Standards scheme, known as WELS, registers a tap for water efficiency and puts its star rating and consumption figure on the label. A tap needs both marks before we can lawfully fit it, and WaterMark approval comes first, since WELS registration depends on it.
Buying online adds one more check. Online sellers are required to display the WaterMark trademark, the specification and licence number, and the WELS registration details with the stars and consumption. You can search either database by model name before paying, and a seller can fill any gaps if you ask.
Business Queensland requires 3 stars as the minimum for new tap fittings and showerheads, and states that renovations sit outside the rule.
Like for Like or a New Tap Position
The price hinges on the tap you choose and on whether the existing valves and connections can be kept. The hole layout, the room to work under the basin and the number of taps being done all feed in as well. A new or moved tap brings a Form 4 lodgement fee; the contractor pays it and may recover the cost, plus admin, from the owner.
A fixed quote locks the price before work begins.
Tap Flow Limits for Rental Properties
The limit is 9 litres per minute, and it applies to indoor cold-water taps and mixer taps before an owner can pass the whole water account to the tenant. Only the cold tap at a basin, kitchen sink or laundry trough counts, mixers included. The bath, garden taps and those feeding appliances are exempt.
Rentals dominate this suburb's housing stock at the last census, so the flow test comes up constantly in our work here. Proof is paperwork: the Residential Tenancies Authority (RTA) points to plumbing reports or compliance certification, receipts, packaging, and warranties or instruction manuals for the taps. The wider charging rules live on our rental property plumbing page.
How Your Tap Replacement Runs
- 1
Call or message us
Ring (07) 3523 7121 or use the form and describe what's going on in Windsor. A few details up front mean the right gear comes on the first trip.
- 2
We measure up and swap the tap
We arrive, confirm the hole layout, the mounting and the supply lines, then take the old tap off and fit the new one to the maker's instructions. Water goes on, leaks get checked, the flow gets read.
- 3
Fixed quote, then the work
We give you a fixed quote before any work starts. It's flat-rate pricing with no hidden fees, and we only start once you approve it.
- 4
Settle up your way
Card and EFTPOS payment on site when the job's finished, or Fix now, pay later if that suits you better.
Plumbing job in Windsor?
$0 call-out fees, available 24/7, and same-day where we can.
Tap Replacement Questions From Windsor Homes
Call (07) 3523 7121How much does it cost to replace a tap in Windsor?
Two things drive the price most: the tap you pick, and whether the old valves and connections can be kept. We price with flat-rate pricing and a fixed quote before any work starts, so the figure is locked in before we begin.
Does a tap replacement in Windsor need a permit or Form 4?
A like-for-like changeover is minor work: no permit, no Form 4. Moving a tap or adding one is notifiable work, so council approval isn't needed but a Form 4 goes to the QBCC. Buildings on a combined drain or recycled-water supply can need a permit.
What is the tap flow limit for rentals?
The limit is 9 litres per minute for indoor cold-water taps and mixers before an owner can pass the full water account to the tenant. It covers the cold tap at a basin, kitchen sink or laundry tub; bath, garden and appliance taps are exempt.
Can a tenant replace a tap in a Windsor rental?
No, the swap is licensed work, so the owner or agent books the plumber. A tenant wanting to install a fixture needs the owner's written go-ahead on a Form 23 first, and a reasonable request can't be refused without cause.
What should a replacement tap match on my sink?
It needs to line up with the number and width of the holes, deck or wall mounting, and the supply connections underneath. Your plumber inspects the existing fitting before you pick a new one, so nothing gets ordered that won't fit.
Ring Windsor Plumbing Services About a New TapWe'll call you back.
Phone (07) 3523 7121 for a licensed plumber in Windsor. We work under QBCC No: 15024607, with flat-rate pricing, no hidden fees and same-day where we can.
To claim your $0 call-out fee, call (07) 3523 7121 today.